为加快cmder启动，我们可以做一些简单优化，减少环境变量检测和批处理调用操作

优化前启动时间：1.69秒

优化后启动时间：0.53秒

1. 将cmder下批处理中lib_console输出禁用

    具体操作为将批处理文件中%lib_console%替换为REM by Moxun - %lib_console%

2. 在vendor\init.bat第一行@echo off后添加以下内容

1    set GIT_INSTALL_ROOT=git所在路径
2    set LANG=zh_CN.UTF-8 不清楚的，执行 git所在路径\usr\binlocale -uU 2

3. 在:start处，注掉%lib_base% cmder_shell，并设置CMDER_SHELL, CMDER_CLINK, CMDER_ALIASES三变量值，CMDER_SHELL试自己选择而定，具体内容如下：

1    REM %lib_base% cmder_shell
2    set CMDER_SHELL=cmd
3    set CMDER_CLINK=1
4    set CMDER_ALIASES=1

4. 在:CONFIGURE_GIT处，使用set path替代%lib_path%调

1	REM    if exist "!GIT_INSTALL_ROOT!\cmd\git.exe" %lib_path% enhance_path "!GIT_INSTALL_ROOT!\cmd" !path_position!
2	    set PATH=!PATH!;!GIT_INSTALL_ROOT!\cmd;
3	    if exist "!GIT_INSTALL_ROOT!\mingw32" (
4	REM        %lib_path% enhance_path "!GIT_INSTALL_ROOT!\mingw32\bin" !path_position!
5	        set PATH=!PATH!;!GIT_INSTALL_ROOT!\mingw32\bin
6	    ) else if exist "!GIT_INSTALL_ROOT!\mingw64" (
7	REM        %lib_path% enhance_path "!GIT_INSTALL_ROOT!\mingw64\bin" !path_position!
8	        set PATH=!PATH!;!GIT_INSTALL_ROOT!\mingw64\bin
9	    )
10
11	    if %nix_tools% geq 1 (
12	REM        %lib_path% enhance_path "!GIT_INSTALL_ROOT!\usr\bin" !path_position!
13	        set PATH=!PATH!;!GIT_INSTALL_ROOT!\usr\bin
14	    )

5. 在:PATH_ENHANCE处，使用set path替代%lib_path%调用

1	REM %lib_path% enhance_path "%CMDER_ROOT%\vendor\bin"
2	set PATH=%PATH%;%CMDER_ROOT%\vendor\bin
3
4	REM %lib_path% enhance_path "%CMDER_ROOT%" append
5	set PATH=%PATH%;%CMDER_ROOT%

6. 在:PATH_ENHANCE处，选择性处理

    注掉对%CMDER_ROOT%\bin下可执行文件的环境变量添加

    REM %lib_path% enhance_path_recursive "%CMDER_ROOT%\bin" %max_depth%

    若%CMDER_ROOT%\bin下放置了可执行文件，直接在init.bat以set path进行添加